Pioneer VSX-LX805 ELITE 11.4 Channel AV Receiver Instruction Manual English - Page 140
Channel Level, Dolby Enabled Speaker, Speaker Virtualizer, Reflex Optimizer Default Value: Off
View all Pioneer VSX-LX805 ELITE 11.4 Channel AV Receiver manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 140 highlights
Speaker Channel Level Adjust the volume level of each speaker. Front Left (Default Value: 0.0 dB) Center (Default Value: 0.0 dB) Front Right (Default Value: 0.0 dB) Height 1 Left (Default Value: 0.0 dB) Height 1 Right (Default Value: 0.0 dB) Height 2 Left (Default Value: 0.0 dB) Height 2 Right (Default Value: 0.0 dB) Surround Right (Default Value: 0.0 dB) Surr Back Right (Default Value: 0.0 dB) Surr Back Left (Default Value: 0.0 dB) Surround Left (Default Value: 0.0 dB) Subwoofer 1 (Default Value: 0.0 dB) Subwoofer 2 (Default Value: 0.0 dB) Select a value between "-12.0 dB" and "+12.0 dB" ("-15.0 dB" and "+12.0 dB" for Subwoofer) (in 0.5 dB increments). A test tone will be output each time you change the value. Select the desired level. (Height 1 Left, Height 1 Right, Height 2 Left, Height 2 Right, Surr Back Right, Surr Back Left): • Depending on the use of the ZONE speakers, it may not be possible to select this setting. Setup Dolby Enabled Speaker Change the settings of Dolby Enabled Speakers. • This setting can be selected when "Configuration" - "Height 1 Speaker" / "Height 2 Speaker" is set to "Dolby Speaker". Distance from the ceiling (Default Value: 6.0 ft/1.80 m) Set the distance between the Dolby Enabled Speaker and the ceiling. Select between "0.1 ft"/"0.03 m" and "15.0 ft"/"4.50 m" ("0.1 ft"/"0.03 m" units). • The unit of distance (ft/m) is displayed using the unit selected for the "Distance" setting. Reflex Optimizer (Default Value: Off) You can enhance the reflection effect of Dolby Enabled Speakers from the ceiling. • The function is not effective if the listening mode is Pure Direct. • The function is not effective if "Dirac Live" ( →p93) has been enabled. Off When this function is not used On When this function is used Speaker Virtualizer The Speaker Virtualizer function can be switched between On and Off. Speaker Virtualizer (Default Value: On) On The listening mode with virtual speaker effect such as F.S.Surround can be selected. Off The listening mode with virtual speaker effect such as F.S.Surround cannot be selected. 140