Pioneer VSX-LX805 ELITE 11.4 Channel AV Receiver Instruction Manual English - Page 155

Miscellaneous „ Tuner (North American and Taiwanese models) Change the settings for Tuner. ‰ AM/FM Frequency Step (Default Value: 10 kHz / 0.2 MHz) Select a frequency step to suit your residential area. Select "10 kHz/0.2 MHz" or "9 kHz/0.05 MHz". • When this setting is changed, all radio presets are deleted. „ Remote ID Change the remote controller ID. ‰ Remote ID (Default Value: 1) Select an ID for the unit's remote controller from "1", "2", and "3" to prevent interference between the unit and other Pioneer components that are installed in the same room. After changing the ID on the main unit, change the ID on the remote controller accordingly with the following procedure. While pressing and holding the MODE button, press the following buttons for approx. 3 seconds. • To change the remote controller ID to "1": AUTO/DIRECT • To change the remote controller ID to "2": SURR • To change the remote controller ID to "3": STEREO Setup „ Firmware Update Change the settings for Firmware Update. ‰ Update Notice (Default Value: Enable) Availability of a firmware update is notified via network. Enable Disable Notify updates Do not notify updates ‰ Version (Default Value: -) The current firmware version is displayed. ‰ Update via NET (Default Value: -) Press ENTER to select when updating the firmware via network. • This setting cannot be selected if you do not have Internet access or there is no updatable firmware. ‰ Update via USB (Default Value: -) Press ENTER to select when updating the firmware via USB. • This setting cannot be selected if a USB storage device is not connected or there is no updatable firmware in the USB storage device. • Wait for a while if "Firmware Update" cannot be selected. It can be selected when the network function is activated. 155