Plantronics Calisto 5300 User Guide - Page 5

Setup Mobile setup 1 To pair your mobile device with your speakerphone, slide the Power switch towards the Bluetooth icon to the right for 2 seconds. You hear "pairing" and the LED next to the Bluetooth icon flashes red and blue. 2 Activate Bluetooth on your phone and set it to search new devices, select Poly CL5300 Series. 3 Pairing is successful when you hear "pairing successful" and the LED goes out. Corded setup Connect the USB cable from the USB port on the speakerphone to the USB port on your computer. USB adapter setup Your Bluetooth USB adapter comes pre-paired to your speakerphone. (BT600 models only) 1 Turn on your speakerphone and insert the Bluetooth USB adapter into your computer. 2 Pairing is successful when you hear "pairing successful" and the USB adapter turns solid blue. NOTE Adapter design may vary. Pair USB adapter again Your USB adapter is pre-paired to your speakerphone. In the event that your adapter is disconnected or bought separately, manually pair the adapter to your headset. 1 Insert the Bluetooth USB adapter into your laptop or computer and wait for your computer to recognize it. 2 Put your speakerphone in pair mode by sliding the Power switch towards the Bluetooth icon to the right for 2 seconds. You hear "pairing" and the LED next to the Bluetooth icon flashes red and blue. 3 Put your adapter into pair mode by pressing and holding the recessed pair button with a pen or paperclip until the adapter flashes red and blue. 5