Polaroid TDA-03211C User Manual - Page 59

SET UP

Get Polaroid TDA-03211C PDF manuals and user guides View all Polaroid TDA-03211C manuals
Add to My Manuals
Save this manual to your list of manuals

Page 59 highlights

ENGLISH Programming Your Remote Control Searching for your Code If your device does not respond to the remote after trying all codes listed for your brand, or if your brand is not listed, try searching for your code: Press a device key once. Press and hold SET UP until the red LED blinks twice; then release. Enter 9-9-1, then the device group number (0= Cable, 1= TV, 2= VCR, 3= Audio). The LED blinks twice. Aim the remote at the device and press . The remote sends IR codes from its library to the selected device, starting with the most popular code first. If the device responds, go to step 7. If the device does not respond, press CH▲. The remote will try the next code. Continue until the device responds. Press CH▼ to try the previous code. To search for other device codes, repeat steps 1 to 5. Press SET UP to save and exit. Checking the Codes If you have set up the remote using the procedure in "Searching for Your Code", you may need to find out which four-digit code is operating your equipment. For example, to fi nd out which code is assigned to your TV: Press TV once. Press and hold SET UP until the red LED blinks twice; then release. Enter 9-9-0. The LED blinks twice. To view the code for the first digit, press 1. Count the LED blinks (for example, three blinks = 3), and write down the number in the appropriate code listing in step 8 under "Programming a Device". If a code digit is 0, the LED does not blink. Repeat step 4 for the four remaining digits, using 2 for the second digit, 3 for the third digit, 4 for the fourth digit, and 5 for the fi fth digit. Changing Volume Lock The remote comes preset to allow independent volume control of each selected device (Global Volume Unlock). However, you may change the Volume Lock setting to Global Volume Lock so that one device's volume will control volume in all other modes. After that, you can perform Individual Volume Unlock on a selected device to set its volume control for independent operation or Global Volume Unlock to remove all volume locking. 57

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
ENGLISH
ENGLISH
ENGLISH
57
Programming Your
Remote Control
For example, to
fi
nd out which code is assigned to your TV:
Searching for your Code
If your device does not respond to the remote after trying all codes listed for your brand, or if
your brand is not listed, try searching for your code:
n
Press a device key once.
o
Press and hold
SET UP
until the red LED blinks twice; then release.
p
Enter
9-9-1
, then the device group number (0= Cable, 1= TV, 2= VCR, 3= Audio).
The LED blinks twice.
q
Aim the remote at the device and press
. The remote sends IR codes from its
library to the selected device, starting with the most popular code
fi
rst. If the device
responds, go to step 7.
r
If the device does not respond, press CH
▲
. The remote will try the next code.
Continue until the device responds. Press
CH
▼
to try the previous code.
s
To search for other device codes, repeat steps 1 to 5.
t
Press
SET UP
to save and exit.
n
Press
TV
once.
o
Press and hold
SET UP
until the red LED blinks twice; then release.
p
Enter
9-9-0
. The LED blinks twice.
q
To view the code for the
fi
rst digit, press 1. Count the LED blinks (for example, three
blinks = 3), and write down the number in the appropriate code listing in step 8
under “Programming a Device”.
If a code digit is 0, the LED does not blink.
r
Repeat step 4 for the four remaining digits, using 2 for the second digit, 3 for the
third digit, 4 for the fourth digit, and 5 for the
fi
fth digit.
Changing Volume Lock
The remote comes preset to allow independent volume control of each selected device (Global Volume
Unlock). However, you may change the Volume Lock setting to Global Volume Lock so that one
device’s volume will control volume in all other modes. After that, you can perform Individual Volume
Unlock on a selected device to set its volume control for independent operation or Global Volume
Unlock to remove all volume locking.
Checking the Codes
If you have set up the remote using the procedure in “Searching for Your Code”, you may need to
fi
nd
out which four-digit code is operating your equipment.