Poulan 460ZX User Manual - Page 38

Parking Brake, Deck Belt, Deck Belt Removal

Get Poulan 460ZX PDF manuals and user guides View all Poulan 460ZX manuals
Add to My Manuals
Save this manual to your list of manuals

Page 38 highlights

MAINTENANCE Parking Brake WARNING! The machine must be standing absolutely still when the park brake is engaged. Visually check that no damage is found on the lever, linages, or switch belonging to the parking brake. Perform a stand still test and check that there is a braking action. To adjust the parking brake, contact the PoulanPRO service workshop. WARNING! Faulty adjustment can cause an accident. Released parking brake Deck Belt Check every 100 hours of operation. Check for severe cracking and large nicks. NOTE: The belt will show some small cracks in normal operation. The belts are not adjustable. Replace belts if they begin to slip from wear. Deck Belt Removal 1. Park on a level surface. Apply parking brake. 2. Lower the deck into the lowest cutting position. 3. Remove bolts from belt shields and remove shields. 4. Remove any dirt or grass that may have accumulated around the cutter housings and entire deck surface. 5. Carefully roll the belt over the top of the cutter housing pulleys and off the mower. Belt Shields Removing deck belt 8058-080-1 8058-115 38

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
mAINTENANCE
38
WARNING!
The machine must be standing
absolutely still when the park brake
is engaged.
Visually check that no damage is found on the lever,
linages, or switch belonging to the parking brake.
Perform a stand still test and check that there is a
braking action.
To adjust the parking brake, contact the PoulanPRO
service workshop.
Parking Brake
WARNING!
Faulty adjustment can cause an
accident.
Deck Belt
Check every 100 hours of operation. Check for severe
cracking and large nicks.
NOTE: The belt will show some small cracks in normal
operation.
The belts are not adjustable. Replace belts if they
begin to slip from wear.
Deck Belt Removal
Park on a level surface. Apply parking brake.
1.
Lower the deck into the lowest cutting position.
2.
Remove bolts from belt shields and remove
3.
shields.
Remove any dirt or grass that may have
4.
accumulated around the cutter housings and
entire deck surface.
Carefully roll the belt over the top of the cutter
5.
housing pulleys and off the mower.
8058-115
Removing deck belt
8058-080-1
Released parking brake
Belt Shields