Poulan EBV215 User Manual - Page 9

MAINTENANCE WARNING: Disconnect power source before performing maintenance. GENERAL RECOMMENDATIONS The warranty on this unit does not cover items that have been subjected to operator abuse or negligence. To receive full value from the warranty, the operator must maintain unit as instructed in this manual. Various adjustments will need to be made periodically to properly maintain your unit. BEFORE EACH USE CHECK FOR LOOSE FASTENERS AND PARTS S Inlet Cover S Blower Tube S Vacuum Tubes S Collection Bag CHECK FOR DAMAGED OR WORN PARTS Contact your authorized service dealer for replacement of damaged or worn parts. S ON/OFF Switch -- Ensure switch functions properly by moving the switch to the OFF position. Make sure motor stops; then restart motor and continue. S Inlet Cover -- Discontinue use of unit if inlet cover fails to latch properly or if it is damaged in any way. AFTER EACH USE INSPECT AND CLEAN UNIT & LABELS Stop unit and unplug extension cord. S After each use, inspect complete unit for loose or damaged parts. Clean the unit using a damp cloth. S Wipe off unit with a clean dry cloth. CLEAN COLLECTION BAG IMPORTANT: THE COLLECTION BAG MUST BE PROPERLY EMPTIED. D You must properly empty and maintain the collection bag to avoid deterioration and obstruction of air flow. D Remove the collection bag from the unit and empty after each use. Do not store bag without emptying the bag of all contents (grass, leaves, etc.). D Wash the bag once a year. Remove the bag from the blower and turn the bag inside out. Wash the bag with a water hose. Allow the bag to hang and dry completely before you reuse the bag. SERVICE HOW TO REMOVE AN OBJECT FROM THE AIR INTAKE WARNING: Stop the unit and dis- connect from the power source before opening the inlet cover. The motor must be stopped and the impeller blades no longer turning to avoid serious injury from the rotating blades. 1. While holding the inlet cover open, remove the vacuum tubes. The inlet cover must be held open through all remaining steps. 2. Carefully reach into the vacuum opening and clear out the air intake area. Clear all debris from impeller. 3. Inspect the impeller for cracks. If cracked or damaged, do not use the unit. Have parts replaced by your authorized service dealer. Do not attempt to replace them yourself. STORAGE WARNING: Perform the following steps after each use: S Stop unit and disconnect from the power source. S Allow motor to cool before storing or transporting. S Store unit with all guards in place. Position unit so that any sharp object cannot accidentally cause injury. S Store unit unplugged, well out of the reach of children. SEASONAL STORAGE Prepare unit for storage at the end of the season or if it will not be used for 30 days or more. If your blower is to be stored for a period of time: S Stop unit and disconnect from the power source. S Clean the entire unit before lengthy storage. S Open inlet cover and clean any dirt, grass, or debris that has collected. Inspect the blower and all tubes. Close and make sure the cover is latched. 9