Poulan PLN1510 User Manual - Page 6

Trimming, Precautions, These, Instructions, Identification, Safety, Symbols

Page 6 highlights

Use only the chain and bar suppied with this product. Do not use any other cutting attachment. Use of such attachments will void your factory warranty and could result in serious bodily injury. 2-3. POLE SAW TRIMMING PRECAUTIONS 1. Be aware of extension cord location while operating pole saw. Be careful not to trip over cord. Keep cord away from chain and operator at all times. 2. Keep bystanders 50 feet (15 meters) away when operating saw. 3. Do not use the pole saw to cut down trees.Use the chain saw without pole attachment. 4. Grip pole saw securely - one hand on the pole, the other on the handle. 5. Keep finger off trigger until ready to make cut. 6. Before starting pole saw, make su- re chain is not touching anything. 7. Keep all parts of body away from chain when saw is running. 8. Do not force pole saw while cutt- ing. Apply light pressure. It will do the job better and safer at the rate for which it was intended. 9. When cutting limbs or branches that are under tension, use extreme caution. Be alert for wood springing bac k. When wood tension is released, limb could spring back and strike operator causing severe injury or death. 10. When carrying pole saw from one place to another: • unplug unit • return telescoping pole to shortest position • hold pole at balance point (close to saw end) • keep guide bar and chain to rear 11. Do not cut small brush and saplings with the pole saw. Use the chain saw only, with extreme care. Slender matter may catch in the chain and be whipped toward you. This could also pull you off balance. 12. Never stand directly under the limb you are trimming. Always position yourself out of the path of falling debris. (See Fig.2-3A) 13. Never stand on a ladder or other type of unstable support while using the pole saw. 14. Always use both hands to operate pole saw .Keep a firm, steady pressure on the pole saw while cutting but do not try to force the saw through the wood. 15.Do not use the pole saw to cut limbs larger in diameter than 4"(10 cm) in diameter. (See Fig.2-3B) 16.Keep other persons away from cutting end of pole saw and at a safe distance from work area. SAVE THESE INSTRUCTIONS 1,Z,; .) ""' CA, 2.3A ) 2.36 2-4. IDENTIFICATION OF SAFETY SYMBOLS A WARNING! This chain saw can be dangerous, careless or improper use can cause serious or even fatal injury. Read and understand the instruction manual befour using the chain saw. Double insulated - When servicing use only identical replacement parts. Replace damaged cord immediately. To reduce shock hazard, do not expose unit to water or operate on wet ground. 6

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16

Use
only
the
chain
and
bar
supp-
ied
with
this
product.
Do
not
use
any
other
cutting
attachment.
Use
of
such
attachments
will
void
your
factory
warranty
and
could
result
in
serious
bodily
injury.
2-3.
POLE
SAW
TRIMMING
PRECAUTIONS
1.
Be
aware
of
extension
cord
locat-
ion
while
operating
pole
saw.
Be
careful
not
to
trip
over
cord.
Keep
cord
away
from
chain
and
operator
at
all
times.
2.
Keep
bystanders
50
feet
(15
mete-
rs)
away
when
operating
saw.
3.
Do
not
use
the
pole
saw
to
cut
down
trees.Use
the
chain
saw
without
pole
attachment.
4.
Grip
pole
saw
securely
-
one
hand
on
the
pole,
the
other
on
the
handle.
5.
Keep
finger
off
trigger
until
ready
to
make
cut.
6.
Before
starting
pole
saw,
make
su-
re
chain
is
not
touching
anything.
7.
Keep
all
parts
of
body
away
from
chain
when
saw
is
running.
8.
Do
not
force
pole
saw
while
cutt-
ing.
Apply
light
pressure.
It
will
do
the
job
better
and
safer
at
the
rate
for
which
it
was
intended.
9.
When
cutting
limbs
or
branches
th-
at
are
under tension,
use
extreme
caution.
Be
alert
for
wood
sprin-
ging
bac
k.
When
wood
tension
is
released,
limb
could
spring
back
and
strike
operator
causing
severe
injury
or
death.
10.
When
carrying
pole
saw
from
one
place
to
another:
unplug
unit
return
telescoping
pole
to
shortest
position
hold
pole
at
balance
point
(close
to
saw
end)
keep
guide
bar
and
chain
to
rear
11.
Do
not
cut
small
brush
and
saplings
with
the
pole
saw.
Use
the
chain
saw
only,
with
extreme
care.
Slender
matter
may
catch
in
the
chain
and
be
whipped
toward
you.
This
could
also
pull
you
off
balance.
12.
Never
stand
directly
under
the
limb
you
are
trimming.
Always
position
yourself
out
of
the
path
of
falling
debris.
(See
Fig.2-3A)
13.
Never
stand
on
a
ladder
or
other
type
of
unstable
support
while
using
the
pole
saw.
14.
Always
use
both
hands
to
operate
pole
saw
.Keep
a
firm,
steady
pressure
on
the
pole
saw
while
cutting
but
do
not
try
to
force
the
saw
through
the
wood.
15.Do
not
use
the
pole
saw
to
cut
limbs
larger
in
diameter
than
4"(10
cm)
in
diameter.
(See
Fig.2-3B)
16.Keep
other
persons
away
from
cutting
end
of
pole
saw
and
at
a
safe
distance
from
work
area.
SAVE
THESE
INSTRUCTIONS
• •
••(,)1
,
Z;
,
.)
""'
CA,
2.3A
)
2.36
2-4.
IDENTIFICATION
OF
SAFETY
SYMBOLS
A
6
WARNING!
This
chain
saw
can
be
dangerous,
careless
or
improper
use
can
cause
serious
or
even
fatal
injury.
Read
and
understand
the
instruction
manual
befour
using
the
chain
saw.
Double
insulated
-
When
servicing
use
only
identical
replacement
parts.
Replace
damaged
cord
immediately.
To
reduce
shock
hazard,
do
not
expose
unit
to
water
or
operate
on
wet
ground.