ProForm 10.0 Txp Owners Manual - Page 10

displayed.automatically

Page 10 highlights

SPEED: This mode displays the speed of the walking belt. Note: Each time one of the SPEED buttons is pressed, this mode -will be displayed.automatically for approximately 5 seconds. CALORIES: This mode displays the total number of Calories you have burned. For accuracy, first select the WEIGHT SET mode and enter your weight into the console. PULSE: This mode displays your heart.rate. Plug the pulse earclip into the jack on the console, and attach the earclip to your left ear lobe. Slide the clothes clip onto your collar to prevent excessive movement of the earclip wire. After a few seconds, your heart rate will be displayed. Note: If your heart rate is not displayed, rub your ear lobe lightly and reposition the earclip. The pulse earclip is not a medically certified device. External factors such as movement may affect heart rate readings. If desired, you can measure your heart rate by placing two fingers over your wrist. SCAN: This mode automatically displays all modes except WEIGHT SET, for approxirnately 3 seconds each, in a repeating cycle. Note: The PULSE mode will be displayed only if the pulse earclip is worn. TURNING OFF THE POWER Stand on the foot rails of the treadmill. Remove the safety key from the console. WARNING: Always remove the safety key from the console when you finish exercising. ••, • io

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16

SPEED:
This
mode
displays
the
speed
of
the
walking
belt.
Note:
Each
time
one
of
the
SPEED
buttons
is
pressed,
this
mode
-will
be
displayed.automatically
for
approximately
5
seconds.
CALORIES:
This
mode
displays
the
total
number
of
Calories
you
have
burned.
For
accuracy,
first
select
the
WEIGHT
SET
mode
and
enter
your
weight
into
the
console.
PULSE:
This
mode
displays
your
heart.rate.
Plug
the
pulse
earclip
into
the
jack
on
the
console,
and
attach
the
earclip
to
your
left
ear
lobe.
Slide
the clothes
clip
onto
your
collar
to
prevent
excessive
movement
of
the
earclip
wire.
After
a
few
seconds,
your
heart
rate
will
be
displayed.
Note:
If
your
heart
rate
is
not
displayed,
rub
your
ear
lobe
lightly
and
reposition
the
earclip.
The
pulse
earclip
is
not
a
medically
certified
device.
External
factors
such
as
movement
may
affect
heart
rate
readings.
If
desired,
you
can
measure
your
heart
rate
by
placing
two
fingers
over
your
wrist.
SCAN:
This
mode
automatically
displays
all
modes
except
WEIGHT
SET,
for
approxirnately
3
seconds
each,
in
a
repeating
cycle.
Note:
The
PULSE
mode
will
be
displayed
only
if
the
pulse
earclip
is
worn.
TURNING
OFF
THE
POWER
Stand
on
the
foot
rails
of
the
treadmill.
Remove
the
safety
key
from
the
console.
WARNING:
Always
remove
the
safety
key
from
the
console
when
you
finish
exercising.
••,
io