ProForm 110 R Bike English Manual - Page 11
Pulse Wire 22. - exercise bike
View all ProForm 110 R Bike manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
15. While a second person holds the Console (4) near the Console Plate (11), connect the wires 15 on the Console to the Main Wire (53) and to the 4 Pulse Wire (22). 22 11 Insert the excess wire into the Console Plate (11) or into the Console (4). 56 Tip: Avoid pinching the wires. Attach the Console (4) to the Console Plate (11) with four M4 x 16mm Screws (56). 53 Avoid pinching the wires 16. Identify the Right Pedal (36), which is marked with an "R." 16 Using an adjustable wrench, firmly tighten the Right Pedal (36) clockwise into the right side of the Crank (43). Firmly tighten the Left Pedal (not shown) counterclockwise into the left side of the Crank (not shown). Adjust the right strap to the desired position, and press the ends of the straps onto the tabs on the Right Pedal (36). Adjust the strap on the Left Pedal (not shown) in the same way. 43 36 Tab 17. Make sure that all parts are properly tightened before you use the exercise bike. Note: After assembly is completed, some extra parts may be left over. Place a mat beneath the exercise bike to protect the floor. 11