ProForm 110 R Bike English Manual - Page 6
Assembly
View all ProForm 110 R Bike manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
ASSEMBLY • Assembly requires two persons. • Place all parts in a cleared area and remove the packing materials. Do not dispose of the packing materials until you complete all assembly steps. • To identify small parts, see page 5. • In addition to the included tool(s), assembly requires the following tools: one Phillips screwdriver one adjustable wrench Assembly may be easier if you have a set of wrenches. To avoid damaging parts, do not use power tools. 1. Orient the Front Stabilizer (32) as indicated by the decal. 1 While a second person lifts the front of the Frame (1), attach the Front Stabilizer (32) with two M10 x 80mm Screws (54). 32 54 1 2. Orient the Rear Stabilizer (31) and the Carriage Rail (9) as shown. 2 Attach the Rear Stabilizer (31) to the Carriage Rail (9) with three M8 x 36mm Screws (26). Do 26 not tighten the Screws yet. 9 31 6