ProForm 1150 Rxw Uk Manual - Page 9
Make sure, that the battery is, turned so the writ, ing is on top., CHEST PULSE SENSOR CARE, CR 2032
View all ProForm 1150 Rxw manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
• If the chest pulse sensor does not function properly after you have followed all of the above instructions, the battery should be replaced in the following way: Locate the battery cover on the back of the sensor unit. Insert a coin into the slot in the cover, turn the cover counterclockwise, and remove the cover. Remove the old battery and insert a new CR 2032 battery. Make sure that the battery is turned so the writing is on top. Replace the battery cover and turn it clockwise to close it. CR 2032 Battery CHEST PULSE SENSOR CARE • Thoroughly dry the chest pulse sensor after each use. The chest pulse sensor is activated when the electrode areas are wetted and the chest pulse sensor is put on; the chest pulse sensor shuts off when it is removed and the electrode areas are dried. If the chest pulse sensor is not dried after each use, it may remain activated longer than necessary, draining the battery prematurely. • Store the chest pulse sensor in a warm, dry place. Do not store the chest pulse sensor in a plastic bag or other container that may trap moisture. • Do not expose the chest pulse sensor to direct sunlight for extended periods of time. Do not expose the chest pulse sensor to temperatures above 50° C (122° F) or below -10° C (14° F). • Do not excessively bend or stretch the sensor unit when using or storing the chest pulse sensor. • Clean the sensor unit using a damp cloth-never use alcohol, abrasives, or chemicals. The chest strap may be hand washed and air dried. 9