ProForm 1500 Rt Treadmill English Manual - Page 13

13. See page 16, and turn on the power. Next, see step 4 on page 17, and lower the incline to the lowest position. Then, remove the key from the console, press the power switch into the off position, and unplug the power cord. Raise the Frame (55) to the position shown. Have a second person hold the Frame until this step is completed. Orient the Storage Latch (51) so that the large barrel and the latch knob are positioned as shown. Attach the upper end of the Storage Latch (51) to the Frame (55) with a 3/8" x 1 3/4" Patch Bolt (6). Attach the lower end of the Storage Latch (51) to the Base (94) with a 3/8" x 2" Bolt (3) and a 3/8" Nut (10). Note: It may be necessary to move the Frame (55) back and forth to align the Storage Latch with the Base. Lower the Frame (55) (see HOW TO LOWER THE TREADMILL FOR USE on page 21). 13 55 Latch Knob 51 Large Barrel 3 94 6 10 14. Make sure that all parts are properly tightened before you use the treadmill. If there are sheets of plastic on the treadmill decals, remove the plastic. To protect the floor or carpet, place a mat under the treadmill. Note: Extra hardware may be included. Keep the included hex keys in a secure place; one of the hex keys is used to adjust the walking belt (see pages 23 and 24). 13