ProForm 225 Csx Bike English Manual - Page 12
Handlebar 4. Attach the Console Cover to
 |
View all ProForm 225 Csx Bike manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
10. Untie and discard the wire tie on the Main Wire (25). Route the Main Wire upward through the 10 Handlebar (4) as shown. 7 While a second person holds the Console (7) near the Handlebar (4), connect the wires on the Console to the Main Wire (25) and the Pulse Wire (23). Then, insert the excess wire into the Handlebar (4). Wires 25 4 23 11. Tip: Avoid pinching the wires. Attach the Console (7) to the Handlebar (4) with four 11 M4 x 16mm Screws (2); start all the Screws, 7 and then tighten them. 4 2 Avoid pinching the wires 12. Slide the Console Cover (3) upward to the Handlebar (4). Attach the Console Cover to the 12 Handlebar and to the Console (7) with three M4 x 16mm Screws (2); start all the Screws, and then tighten them. 4 7 2 3 12
-
1 -
2
-
3
-
4
-
5
-
6
-
7 -
8 -
9 -
10 -
11 -
12 -
13 -
14 -
15 -
16 -
17 -
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
 |
 |
12
10
25
Wires
23
7
7
4
11
3
2
4
12
10. Untie and discard the wire tie on the Main Wire
(25). Route the Main Wire upward through the
Handlebar (4) as shown.
While a second person holds the Console (7)
near the Handlebar (4), connect the wires on
the Console to the Main Wire (25) and the Pulse
Wire (23).
Then, insert the excess wire into the
Handlebar (4).
11.
Tip: Avoid pinching the wires.
Attach the
Console (7) to the Handlebar (4) with four
M4 x 16mm Screws (2);
start all the Screws,
and then tighten them.
2
7
4
Avoid pinching
the wires
12. Slide the Console Cover (3) upward to the
Handlebar (4). Attach the Console Cover to the
Handlebar and to the Console (7) with three
M4 x 16mm Screws (2);
start all the Screws,
and then tighten them.