ProForm 285t English Manual - Page 5
Assembly - parts
View all ProForm 285t manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
ASSEMBLY Assembly requires two people. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed. Refer to the drawings below to identify the parts used in assembly. Assembly requires the following tools: The included allen wrench and your own phillips screwdriver and two adjustable wrenches . Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, a small amount of lubricant may be transferred to the top of the walking belt or the shipping carton. This is a normal condition and does not affect treadmill performance. If there is lubricant on top of the walking belt, simply wipe off the lubricant with a soft cloth and a mild, non-abrasive cleaner. Extension Leg Screw (34)Ð2 Handrail Washer (16)Ð2 Handrail Bolt (15)Ð2 Latch Screw/ Handrail Screw (13)Ð4 Wheel Nut (39)Ð2 Wheel Bolt (37)Ð2 1. With the help of a second person, carefully raise the Uprights (14) until the treadmill is in the position shown. 1 14 2. Attach a Wheel (38) to each Extension Leg (62) with a Wheel Bolt (37) and a Wheel Nut (39) as shown. Tighten 2 the Wheel Bolts only until they are snug; do not overtighten the Wheel Bolts. 37 5 62 39 38 37