ProForm 350s Crosstrainer Treadmill English Manual - Page 8

5. Attach the end of the ground wire to the small hole in the 5 side of the Right Handrail (72) with a Silver Ground Screw (75). Ground Wire 75 72 6. Turn the Console Base (47) upside-down; be careful not 6 to scratch the Console (43). Set the Crossbar (40) in the Console Base, with the indicated small holes on top. Attach the Crossbar (40) to the Console Base (47) with two 3/4" Screws (2). Do not overtighten the Screws. Small Holes 2 2 40 7. Place the Console Base (47) on the Right Handrail (72) 7 and the Left Handrail (not shown). Attach the Console Base with four 3/4" Screws (2) (only two Screws are shown). Do not overtighten the Screws. Insert the Wire Harness (42) through the two indicated plastic ties on the Console Base (47). Next, touch the Right Handrail (72) to discharge any static. See the inset drawing. Find the 5-pin connector on the end of the Wire Harness. Insert the connector into the red socket beneath the console. The connector should slide easily 2 into the socket and snap into place. If the connector does not slide easily and snap into place, turn the connec- tor and then insert it. Insert the 6-pin connector into the black socket beneath the console in the same way. Make sure that the connectors and wires appear as shown in the inset drawing. IF THE CONNECTORS ARE NOT INSERTED PROPERLY, THE CONSOLE MAY BE DAMAGED WHEN THE POWER IS TURNED ON. 47 43 47 42 Ties 72 43 42 5-pin 6-pin 8