ProForm 400 Spx Bike English Manual - Page 7
make sure that the Saddle is level and is, pointing straight ahead.
View all ProForm 400 Spx Bike manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
3. Attach the Rear Stabilizer (5) to the Frame (1) with two M8 x 55mm Carriage Bolts (9), two M8 3 Washers (3), and two M8 Flange Nuts (2). 2 53 1 9 4. Orient the Saddle (31) as shown. 4 Slide the Saddle (31) onto the Saddle Carriage (32); make sure that the Saddle is level and is pointing straight ahead. Then, tighten the two 31 nuts (A) beneath the Saddle. 32 A 7
7
2
9
3
5
1
3
3.
Attach the Rear Stabilizer (5) to the Frame (1)
with two M8 x 55mm Carriage Bolts (9), two M8
Washers (3), and two M8 Flange Nuts (2).
4
4.
Orient the Saddle (31) as shown.
Slide the Saddle (31) onto the Saddle Carriage
(32);
make sure that the Saddle is level and is
pointing straight ahead.
Then, tighten the two
nuts (A) beneath the Saddle.
32
A
31