ProForm 415 S Treadmill English Manual - Page 17
The Information Mode/demo Mode
View all ProForm 415 S Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
THE INFORMATION MODE/DEMO MODE The console features an information mode that keeps track of treadmill usage information and allows you to select a unit of measurement for the console. To select the information mode, insert the key into the console while holding down the Stop button, and then release the Stop button. When the information mode is selected, the following information will be shown: An "E" (for English) or an "M" (for metric) will appear in the lower right corner of the display. Press the Speed increase button to change the unit of measurement, if desired. IMPORTANT: If a "d" appears in the display, the console is in the "demo" mode. This mode is intended to be used only when a treadmill is displayed in a store. When the console is in the demo mode, the power cord can be plugged in, the key can be removed from the console, and the display will remain lit, although the buttons will not operate. If a "d" appears when the information mode is selected, press the Speed decrease button so the "d" disappears. The upper left corner of the display will show the total number of thousands of steps taken by all users of the treadmill. For example, the number 396 would indicate 396,000 steps taken. The lower left corner of the display will show the total number of hours that the treadmill has been used and the total number of miles (or kilometers) that the walking belt has moved, for a few seconds at a time. To exit the information mode, remove the key from the console. 17