ProForm 4500 Treadmill Uk Manual - Page 10
Sole May Be Damaged When
View all ProForm 4500 Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
10. Insert the indicated connectors into the Right Upright (78). Next, insert the fronts of the brackets on the Bridge (95) into the Uprights (74, 78), and then fully insert the brackets. Make sure that the plastic edges of the Bridge are inside the Uprights. Be careful not to pinch the wires. Attach the Bridge (95) with six 1/4" x 1/2" Bolts (7) and six 1/4" Star Washers (10); start the two indicated Bolts, then start the other four Bolts, and then tighten all six Bolts. See steps 5 and 7. Tighten the four 3/8" x 4 1/2" Bolts (6). 10 10 7 Start First 74 95 Connectors 7 Front Edge 7 10 Start First 7 78 11. With the help of a second person, hold the console assembly near the Bridge (95). Connect the Bridge Wire (52) to the console assembly wire. See the inset drawing in step 9. The connectors should slide together easily and snap into place. If they do not, turn one connector and try again. IF THE CONNECTORS ARE NOT CONNECTED PROPERLY, THE CONSOLE MAY BE DAMAGED WHEN THE POWER IS TURNED ON. 11 Console Assembly Connect the Console Ground Wire (101) to the console assembly ground wire. Insert the wires 101 95 52 into the console assembly. 9 Attach the console assembly with three 3/8" x 1 1/4" Bolts (5) and three 3/8" Star Washers (9). Be careful not to pinch the wires. 5 10