ProForm 485 Cx Treadmill User Manual - Page 8

5. Attach the lower ends of the Handrails (103, 5 104) to the Uprights (84) with two Long Handrail Bolts (106) and two Star Washers (8); start both Handrail Bolts and then firmly tighten them. Firmly tighten the four Handrail Bolts (64) (only two are shown). See step 3. Firmly tighten the four Screws (3). 84 106 8 103 64 84 8 106 6. While a second person holds the console as- sembly near the Left Handrail (103), attach the 6 ground wire to the indicated hole in the Left Handrail with a 1/2" Screw (33). 104 Ground Wire 33 Hole 103 Console Assembly 7. While the second person continues to hold the console assembly, locate the console wire harness on the back of the console assembly. Connect the console. See the inset drawing. The connectors should slide together easily and snap into place. If they do not, turn one connector and then try again. IF THE CONNECTORS ARE NOT CONNECTED PROPERLY, THE CONSOLE MAY BE DAMAGED WHEN THE POWER IS TURNED ON. Then, insert the connectors down into the Right Handrail (104). 7 Console Wire Harness 77 Console Assembly 77 104 8