ProForm 530 Zlt Instruction Manual - Page 10
Be careful not to pinch the Upright Wire 63., Do not fully tighten the, Screws yet., Attach the Left
View all ProForm 530 Zlt manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
6. Identify the Right Handrail (64). Have a second person hold the Right Handrail near the Right 6 Upright (76). Route the Upright Wire (63) into the bottom of the Right Handrail (64) and out of the hole in the Right Handrail. Be careful not to pinch the Upright Wire (63). Insert and partially tighten a 5/16" x 3/4" Screw (5) with a 5/16" Star Washer (6) into the Right Upright (76) and the Right Handrail (64). Then, partially tighten a 5/16" x 3" Screw (7) with a 5/16" Star Washer (6) into the Right Handrail and the Right Upright. Do not fully tighten the Screws yet. Attach the Left Handrail (not shown) in the same way. Note: There are no wires on the left side. 7 6 64 63 76 6 5 7. Set the console assembly face down on a soft surface to avoid scratching the console assembly. Remove and discard the two screws (B) from the Console Crossbar (61). Then, remove the Console Crossbar. 7 B 61 Console Assembly B 10