ProForm 585 Cs Treadmill English Manual - Page 17
How To Use The Weight Loss Center
View all ProForm 585 Cs Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
HOW TO USE THE WEIGHT LOSS CENTER 1. Insert the key into the console. See HOW TO TURN ON THE POWER on page 14. 2. Select a weight loss workout. To use the weight loss center, press the Weight Loss Center button. Input your weight, the number of calories you wish to burn, and the desired length of time for the workout by repeatedly pressing the increase and decrease buttons next to the Weight Loss Center button. Press the Enter button after each selection. Note: Once you have entered your weight, it will be saved in memory. 3. Start the walking belt. Press the Start button or the Speed increase button to start the workout. A moment after you press the button, the treadmill will automatically adjust to the first speed and incline settings of the workout. Hold the handrails and begin walking. Each workout is divided into one-minute segments. One speed setting and one incline setting are programmed for each segment. Note: The same speed setting and/or incline setting may be programmed for consecutive segments. Tones will sound at the end of each segment. Three seconds before the speed and/or incline of the treadmill is about to change, the speed setting and/or incline setting will flash in the display for a moment to alert you. The treadmill will then auto- matically adjust to the speed and/or incline settings for the next segment. The workout will continue in this way until the last segment ends. The walking belt will then slow to a stop. If the speed or incline setting is too high or too low at any time during the workout, you can manually override the setting by pressing the Speed or Incline buttons; however, when the next segment begins, the treadmill will automatically adjust to the speed and incline settings for the next segment. To stop the workout at any time, press the Stop button. To restart the workout, press the Start button or the Speed increase button. The walking belt will begin to move at 1 mph. When the next segment of the workout begins, the treadmill will automatically adjust to the speed and incline settings for the next segment. 4. Select a display mode and monitor your progress with the display. See step 5 on page 15. 5. Measure your heart rate if desired. See step 6 on page 15. 6. When you are finished exercising, remove the key from the console. See step 7 on page 15. 17