ProForm 590t Treadmill English Manual - Page 8

3. Identify the Right Upright (85) and the Right Upright Spacer (91), which are marked with "Right" stickers. Insert the Upright Wire (87) through the Right Upright Spacer (91) as shown. Then, set the Right Upright Spacer on the Base (95). See inset drawings B and C. Make sure that the Right Upright Spacer sits flush against the Base. If necessary, turn the Right Upright Spacer and try again. Have a second person hold the Right Upright (85) near the Base (95). See inset drawing A. Tie the wire tie in the Right Upright securely around the end of the Upright Wire (87). Then, pull the other end of the wire tie until the Upright Wire is routed through the Right Upright. 3 87 A 87 Wire Tie 85 Wire Tie B 91 C 95 91 85 87 91 95 95 4. Hold a Screw Spacer (14) inside the lower end of the Right Upright (85). Insert a 3/8" x 4" Patch 4 Screw (7) with a 3/8" Star Washer (11) into the Right Upright and the Screw Spacer. Repeat this step with a second Screw Spacer (14), 3/8" x 4" Patch Screw (7), and 3/8" Star Washer (11). Hold the Right Upright (85) against the Right Upright Spacer (91). Be careful not to pinch the Upright Wire (87). Tighten the 3/8" x 4" Patch Screws (7) until the heads of the Patch Screws touch the Right Upright; do not fully tighten the Patch Screws yet. Correct 85 Incorrect 7 11 87 14 91 8