ProForm 590t Treadmill English Manual - Page 9

5. With the help of a second person, carefully tip the treadmill onto its right side. Partially fold the 5 Frame (55) so that the treadmill is more stable; do not fully fold the Frame yet. 89 Attach a Wheel (96) to the Base (95) with a 3/8" x 2" Bolt (8) and a 3/8" Nut (10). Do not overtighten the Nut; the Wheel must turn freely. Then, press a Base Cap (89) into the Base (95). 8 55 95 96 10 6. Hold a Screw Spacer (14) inside the lower end of the Left Upright (84). Insert a 3/8" x 4" Patch Screw (7) with a 3/8" Star Washer (11) into the Left Upright and the Screw Spacer. Repeat this step with a second Screw Spacer (14), 3/8" x 4" Patch Screw (7), and 3/8" Star Washer (11). Hold the Left Upright Spacer (88) and the Left Upright (84) against the Base (95). See inset drawings B and C in step 3. Make sure that the Left Upright Spacer sits flush against the Base. If necessary, turn the Left Upright Spacer and try again. Then, tighten the 3/8" x 4" Patch Screws (7) until the heads of the Patch Screws touch the Left Upright; do not fully tighten the Patch Screws yet. With the help of a second person, tip the treadmill so that the Base (95) is flat on the floor. 6 7 11 14 95 84 88 9