ProForm 605 Zle Instruction Manual - Page 11
outlet, see HOW TO PLUG IN THE POWER, to the Upper Wire 116, the Pulse Wire 117
View all ProForm 605 Zle manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
12. While a second person holds the Console (8) near the Upright (4), connect the Console wires to the Upper Wire (116), the Pulse Wire (117), and the Extension Wire (93). Insert the excess wire into the Upright (4). Tip: Avoid pinching the wires. Attach the Console (8) to the Upright (4) with four M4 x 16mm Screws (97). 12 8 Avoid pinching the wires 117 116 4 93 97 13. Apply a small amount of the included PTFE grease to a paper towel. Spread a thin layer of 13 the PTFE grease evenly along the Right and Left Tracks (11, 33) where the Rollers (48) move. Then, wipe off any excess grease. 14. Plug the Power Adapter (114) into the receptacle on the frame of the elliptical. 14 Note: To plug the Power Adapter (114) into an outlet, see HOW TO PLUG IN THE POWER ADAPTER on page 12. 48 33 PTFE Grease 11 114 15. Make sure that all parts are properly tightened before you use the elliptical. Note: Extra parts may be included. Place a mat beneath the elliptical to protect the floor. 11