ProForm 605 Zle Instruction Manual - Page 7
Attach the Front Stabilizer 3 to the Frame 1, while you complete this step.
View all ProForm 605 Zle manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
3. With the help of a second person, place some of the packing materials (not shown) under the 3 front of the Frame (1). Have the second per- son hold the Frame to prevent it from tipping while you complete this step. Attach the Front Stabilizer (3) to the Frame (1) with two M10 x 115mm Screws (104). Remove the packing materials from under the front of the Frame (1). 4. Orient the Upright (4) as shown. 4 Tip: Avoid pinching the wires. Have a second person hold the Upright (4) against the Frame (1). Attach the Upright with four M10 x 60mm Screws (106). Start all the Screws, and then tighten them. 104 3 1 Avoid pinching 4 the wires 106 1 7
7
3
3.
With the help of a second person, place some
of the packing materials (not shown) under the
front of the Frame (1).
Have the second per
-
son hold the Frame to prevent it from tipping
while you complete this step.
Attach the Front Stabilizer (3) to the Frame (1)
with two M10 x 115mm Screws (104).
Remove the packing materials from under the
front of the Frame (1).
1
3
104
4
4.
Orient the Upright (4) as shown.
Tip: Avoid pinching the wires.
Have a
second person hold the Upright (4) against the
Frame (1). Attach the Upright with four M10 x
60mm Screws (106).
Start all the Screws, and
then tighten them.
Avoid pinching
the wires
4
1
106