ProForm 680 Trainer Treadmill English Manual - Page 10
Aged When You Turn On The Power.
View all ProForm 680 Trainer Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
9. Have a second person hold the Right Handrail 9 (105) near the Right Upright (79). Insert the Upright Wire (86) into the bottom of the Right Handrail (105) and pull it out of the hole in the top of the Right Handrail. Attach the Right Handrail (105) to the Right Upright (79) with three 5/16" x 3/4" Bolts (4) and three 5/16" Star Washers (9); do not fully tighten the Bolts yet. Be careful not to pinch the Upright Wire (86). Hole 4 9 4 86 105 79 10. Have a second person hold the console assembly near the Right Handrail (105). Connect the Upright Wire (86) to the console wire. See the inset drawing. The connectors should slide together easily and snap into place. If they do not, turn one connector and try again. IF THE CONNECTORS ARE NOT CONNECTED PROPERLY, THE CONSOLE MAY BE DAMAGED WHEN YOU TURN ON THE POWER. Then, remove the wire tie from the Upright Wire. Insert the connectors and the excess wire into the Right Handrail. Set the console assembly on the Right Handrail (105) and the Left Handrail (not shown). Be careful not to pinch the wires. 10 Console Assembly Console 105 86 Wire Console Wire Wire Tie 86 10