ProForm 680 Trainer Treadmill English Manual - Page 7

1. Make sure that the power cord is unplugged. With the help of a second person, carefully tip the treadmill onto its left side. Partially fold the Frame (53) so that the treadmill is more stable; do not fully fold the Frame yet. Cut the shipping tie securing the Upright Wire (86) to the Base (60). Locate a tie in the indicated hole in the Base, and use the tie to pull the Upright Wire out of the hole. Attach two Base Feet (88) to the Base (60) in the locations shown with two #8 x 1" Tek Screws (2) and two Base Foot Spacers (89). Then, attach two Base Feet (88) with only #8 x 1" Tek Screws (2). 1 86 53 89 88 2 Hole 89 88 2 2. Attach a Wheel (90) to the Base (60) with a 3/8" x 2" Bolt (3) and a 3/8" Locknut (11). Do not 2 overtighten the Locknut; the Wheel must turn freely. 60 3 60 88 2 88 2 90 11 3. Identify the Right Upright (79) and the Right Upright Spacer (83). Insert the Upright Wire (86) through the Right Upright Spacer as shown. Then, set the Right Upright Spacer on the Base (60). Be careful not to pinch the Upright Wire. Have a second person hold the Right Upright (79) near the Base (60). See the inset drawing. Tie the wire tie in the Right Upright securely around the end of the Upright Wire (86). Then, pull the other end of the wire tie until the Upright Wire is routed completely through the Right Upright. 3 86 86 7 Wire Tie 79 Wire Tie 79 86 83 60