ProForm 7.0 Personal Fit-trainer Treadmill Canadian English Manual - Page 8

3. Identify the Right Upright (78) and the Right Upright Spacer (80), which are marked with stickers. Insert the Upright Wire (77) through the Right Upright Spacer as shown. Then, set the Right Upright Spacer on the Base (85). Have a second person hold the Right Upright (78) near the Base (85). See the inset drawing. Tie the long tie in the Right Upright securely around the end of the Upright Wire (77). Then, pull the other end of the long tie until the Upright Wire is routed completely through the Right Upright. 3 77 78 Wire 77 Tie 4. Hold a Bolt Spacer (79) inside the lower end of the Right Upright (78). Insert an M10 x 96mm 4 Bolt (5) with an M10 Star Washer (8) into the Right Upright and the Bolt Spacer. Repeat this 78 step with a second Bolt Spacer (79), M10 x 96mm Bolt (5), and M10 Star Washer (8). Hold the Right Upright (78) against the Right Upright Spacer (80). Be careful not to pinch the Upright Wire (77). Tighten the M10 x 96mm Bolts (5) until the heads of the Bolts touch the Right Upright; do not fully tighten the Bolts yet. Press a Base Endcap (82) into the Base (85). Long Tie 78 77 80 85 5 8 77 79 79 82 80 85 8