ProForm 715 Smr Bike Uk Manual - Page 6

5. The Console (16) requires four 1.5V "D" batteries; 5 alkaline batteries are recommended. Remove the indi- cated screw from the battery drawer, and pull the bat- tery drawer open. Insert four batteries into the battery drawer; make sure that the batteries are oriented as shown by the markings inside of the battery draw- er. Close the battery drawer and reattach the screw. 16 Batteries Screw 6. Hold the Console (16) near the Upright (13). Connect 6 the console wire to the Upper Wire Harness (36). Insert the excess console wire and Upper Wire Harness (36) down into the Upright (13). Next, attach the Console (16) to the Upright with four M5 x 12mm Screws (49). Be careful to avoid pinching the wires. Console Wire 49 36 16 49 Be careful to avoid pinching 13 the wires. 7. Attach the Seat (12) to the Seat Post (5) with three M8 7 Flat Washers (51) and three M8 Nylon Locknuts (10). 12 Note: The Flat Washers and Nylon Locknuts may be preattached to the underside of the Seat. 5 51 10 51 10 6