ProForm 725tl Treadmill English Manual - Page 7
ProForm 725tl Treadmill Manual
View all ProForm 725tl Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
5. Cut the two Shipping Ties from the Handrails (61). 5 ° Shipping Ties 61 6. Remove the four Handrail Bracket Screws (73) from the right side of the Frame (83). Position the right Handrail Bracket (42) over the four screw holes in the Frame. Loosely thread two of the Screws into the back holes of the Bracket and into the Frame as shown. Repeat this step on the left side of the Frame (83). 73 42 . .. . 7. Locate the section HOW TO FOLD THE TREADMILL FOR STORAGE on page 18. Follow the instructions to 7 fold the treadmill. Thread two more Handrail Bracket Screws (73) into the right Handrail Bracket (42) and Frame (83). Firmly tighten all four Screws in the Bracket. Thread two more Screws into the left Handrail Bracket and Frame (not shown). Firmly tighten all four Screws in the Bracket. 83 42 73 83 t - - 8. Remove the backing from the Adhesive Clip (90). Press the Clip onto the Base (86) in the indicated location. 8 Press the Allen Wrench (89) into the Clip. 9. Attach the F .Ilse Sensor (114) to the Headband (115). Make sure that the sensor window is pressed through the indicated hole in the Headband. Press open the clothes clip, and insert the pulse sensor wire into the clothes clip. Make sure that the pulse sensor wire is resting against the hinge of the clothes clip (see the inset drawing). The use of the pulse sensor is explained on page 8 i 89 9 Sensor 114 Window Clothes Clip Hinge • Hole 000000° Clothes Clip 115 Pulse Sensor Wire 10.Make sure that all parts are tightened before you use the treadmill. Note: To protect the floor or carpet, place a mat under the treadmill. To order a mat, see REPLACEMENT PARTS on the back cover. 7