ProForm 775treadmill English Manual - Page 7
Extension Leg. Next, insert two Base Leg Bolts - treadmill
View all ProForm 775treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
2. With the help of a second person, carefully tip the treadmill onto its right side as shown. Insert the other Extension Leg (89) into the base of the Uprights (84) as shown. Hold two Extension Leg Nuts (67) in the bottom of the Extension Leg. Next, insert two Base Leg Bolts (65) into the top of the Extension Leg, and firmly tighten the Base Leg Bolts into the Extension Leg Nuts. Attach two Base Pads (82) to the base of the Uprights (84) with two 3/4" Tek Screws (22). With the help of a second person, carefully raise the treadmill so that all four Base Pads (82) are on the floor and the Uprights (84) are in a vertical position. 3. Identify the Latch Assembly (29). Remove the tie from the end of the tube. Make sure that the sleeve has been slid over the indicated hole and that the Latch Knob (97) is locked into the indicated hole. Pull on the sleeve to make sure that it is locked into place. 2 84 65 82 22 82 67 89 3 Tube 97 Sleeve Hole 29 4. Raise the Frame (58) to the position shown. Have a second person hold the Frame until 4 this step is completed. Remove the plastic ties from the ends of the Latch Assembly (29). Orient the Latch Assembly (29) so that the large barrel and the Latch Knob (97) are positioned as shown; make sure that all of the holes are aligned. Attach the lower end of the Latch Assembly to the bracket on the Uprights (84) with the Lower Latch Shock Bolt (39) and a Latch Shock Nut (30). Then, attach the upper end of the Latch Assembly (29) to the bracket on the Frame (58) with the Upper Latch Shock Bolt (50) and a Latch Shock Nut (30). Note: It may be necessary to move the Frame back and forth to align the Latch Assembly with the bracket. 58 30 50 97 29 Large Barrel 84 30 39 7