ProForm Crosswalk 397 Treadmill English Manual - Page 8

3. Identify the Right Upright (76). Have a second person hold the Right Upright near the 3 Base (74). See the inset drawing. Tie the wire tie in the Right Upright (76) securely around the end of the Upright Wire (63). Then, insert the Upright Wire into the lower end of the Right Upright as you pull the other end of the wire tie through the Right Upright. Wire 63 76 Tie 63 Wire Tie 4. Hold the Right Upright (76) against the Base (74). Be careful not to pinch the Upright 4 Wire (63).  Insert a 3/8" x 3 1/4" Screw (2) with a 3/8" Star Washer (3) into the top hole in the Right Upright (76). Then, partially tighten the Screw into the Base (74). Partially tighten two more 3/8" x 3 1/4" Screws (2) with two 3/8" Star Washers (3) into the Right Upright (76) and the Base (74); do not fully tighten the Screws yet. Attach the Left Upright (not shown) in the same way. Note: There are no wires on the left side. 76 74 76 63 74 3 2 3 8