ProForm Crosswalk 397 Treadmill English Manual - Page 9

5. Identify the Left and Right Handrails (59, 64). Remove the four 5/16" x 3/4" Screws (5) and 5 four 5/16" Star Washers (6) from the bottoms 5, 6 and sides of each Handrail. Hold the Right Handrail (64) near the Right 63 64 Upright (76). Insert the wire tie on the Upright 6 Wire (63) through the hole in the bottom and pull it out of the hole in the side of the Right Handrail as shown. Then, pull the Upright Wire through 5, 6 5 the Right Handrail. 59 Attach the Right Handrail (64) to the Right 6 Upright (76) with two of the 5/16" x 3/4" Screws 6 5 (5) and two of the 5/16" Star Washers (6) that you just removed. Make sure not to pinch the 76 Upright Wire (63). Start both Screws, and 5 6 then tighten them. 5 Attach the Left Handrail (59) to the Left Upright (66) as described above. Note: There 66 are no wires on the left side. 6. Position the Console Crossbar (61) between the Left and Right Handrails (59, 64) with the 6 Console Ground Wire (47) positioned as shown. Attach the Console Crossbar (61) to the Left and Right Handrails (59, 64) with the other four 5/16" x 3/4" Screws (5) and the other four 5/16" Star Washers (6) that you removed in step 5. Start all four Screws, and then tighten them. 47 61 64 6 56 5 59 9