ProForm Crosswalk Advanced 525 S Canadian English Manual - Page 8

Set the Console Base 47 on the Left and Right

Page 8 highlights

5. Hold the Console Base (47) near the Left Handrail (71). 5 Attach the end of the ground wire on the Console Base to the indicated small hole in the Left Handrail with the Silver Ground Screw (75). Ground Wire 47 Small Hole 75 71 6. Set the Console Base (47) on the Left and Right Handrails (71, 72). Slide a Handrail Washer (100) and a Plastic Spacer (9) onto a 2" Screw (40), and insert the Plastic Spacer and the Screw into the hole in the bottom of the Right Handrail (72) as shown. Start the Screw into the Console Base (47), but do not tighten it yet. Repeat this step with the Left Handrail (71). 6 9 100 40 47 71 72 9 100 40 7. Press a Handrail Endcap (98) into the end of the Left Handrail (71). Start a 3/4" Screw (2) into the Handrail Endcap and the Console Base, but do not tighten the Screw yet. Repeat this step with the other Handrail Endcap (98) and the Right Handrail (72). Tighten the two 3/4" Screws (2) and the two 2" Screws (40); being careful not to overtighten the Screws. 7 98 72 2 40 47 98 71 2 40 8

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30

8
Small
Hole
71
5.
Hold the Console Base (47) near the Left Handrail (71).
Attach the end of the ground wire on the Console Base
to the indicated small hole in the Left Handrail with the
Silver Ground Screw (75).
47
75
Ground
Wire
5
40
40
100
6.
Set the Console Base (47) on the Left and Right
Handrails (71, 72).
Slide a Handrail Washer (100) and a Plastic Spacer (9)
onto a 2” Screw (40), and insert the Plastic Spacer and
the Screw into the hole in the bottom of the Right
Handrail (72) as shown.
Start the Screw into the
Console Base (47), but do not tighten it yet.
Repeat this step with the Left Handrail (71).
72
71
47
6
9
9
2
2
40
40
7.
Press a Handrail Endcap (98) into the end of the Left
Handrail (71).
Start a 3/4” Screw (2) into the Handrail
Endcap and the Console Base, but do not tighten the
Screw yet.
Repeat this step with the other Handrail Endcap (98) and
the Right Handrail (72).
Tighten the two 3/4” Screws (2) and the two 2” Screws
(40); being careful not to overtighten the Screws.
72
71
47
98
98
7
100