ProForm Hiit 7 Instruction Manual - Page 9

Tip: Avoid pinching the wires.

Get ProForm Hiit 7 PDF manuals and user guides View all ProForm Hiit 7 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 9 highlights

6. See the upper drawing. With the help of a second person, orient the Console (5), the 6 Console Cover (7), and the Console Bracket (4) as shown. Then, route the wire (A) on the Console through the Console Cover and the Console Bracket. See the lower drawing. Tip: Avoid pinching the wire. Attach the Console (5) and the Console Cover (7) to the Console Bracket (4) with four M4 x 22mm Screws (107); start all the Screws, and then tighten them. 5 A 7 4 5 7 Avoid pinching the wires 4 7. While a second person holds the Console Bracket (4) near the Frame (1), connect the wire 7 (A) on the Console (5) to the Main Wire (115). Tip: Avoid pinching the wires. Attach the Console Bracket (4) to the Frame (1) with two M8 x 86mm Screws (109) and two M8 x 15mm Screws (96); start all the Screws, and then tighten them. 107 4 96 1 5 Avoid pinching A the wires 115 109 96 9

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
9
6.
See the upper drawing.
With the help of a
second person, orient the Console (5), the
Console Cover (7), and the Console Bracket
(4) as shown. Then, route the wire (A) on the
Console through the Console Cover and the
Console Bracket.
See the lower drawing. Tip: Avoid pinching
the wire.
Attach the Console (5) and the
Console Cover (7) to the Console Bracket (4)
with four M4 x 22mm Screws (107);
start all the
Screws, and then tighten them.
6
5
5
7
7
4
4
107
A
A
Avoid pinching
the wires
4
96
96
109
115
Avoid
pinching
the wires
7
7.
While a second person holds the Console
Bracket (4) near the Frame (1), connect the wire
(A) on the Console (5) to the Main Wire (115).
Tip: Avoid pinching the wires.
Attach the
Console Bracket (4) to the Frame (1) with two
M8 x 86mm Screws (109) and two M8 x 15mm
Screws (96);
start all the Screws, and then
tighten them.
1
5