ProForm Performance 1500 Instruction Manual - Page 13

Then, firmly tighten the four 5/16 x 3/4, start all four

Get ProForm Performance 1500 PDF manuals and user guides View all ProForm Performance 1500 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 13 highlights

12. H old the console assembly (H) near the Pulse Crossbar (93). Connect the ground wire from the console assembly to the Console Ground Wire (58) on the Pulse Crossbar. Next, set the console assembly (H) on the brackets on the Handrails (86); do not pinch any wires. Make sure that the handrail wires (G) are oriented as shown. Attach the console assembly (H) with the four 5/16" x 3/4" Screws (4) that you removed in step 9 and four 5/16" Star Washers (11); do not fully tighten the Screws yet. 12 G 86 11 4 H 58 86 Ground Wire 93 G 11 4 13. Attach the console assembly (H) to the Pulse Crossbar (93) with four #8 x 1/2" Screws (1); start all four Screws, and then tighten them. Then, firmly tighten the four 5/16" x 3/4" Screws (4). 13 H 4 1 4 93 1 14. Carefully slide the Upright Crossbar (31) between the Left and Right Uprights (89, 90). 14 Attach the Upright Crossbar with the four 5/16" x 3/4" Screws (4) that you removed in step 6 and four 5/16" Star Washers (11); start all four Screws, and then tighten them. 11 4 31 4 11 90 89 13

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
13
12.
Hold the console assembly (H) near the Pulse
Crossbar (93). Connect the ground wire from the
console assembly to the Console Ground Wire
(58) on the Pulse Crossbar.
Next, set the console assembly (H) on the brack-
ets on the Handrails (86);
do not pinch any
wires. Make sure that the handrail wires (G)
are oriented as shown.
Attach the console assembly (H) with the four
5/16" x 3/4" Screws (4) that you removed in step
9 and four 5/16" Star Washers (11);
do not fully
tighten the Screws yet.
12
93
H
11
86
58
4
13. Attach the console assembly (H) to the Pulse
Crossbar (93) with four #8 x 1/2" Screws (1);
start all four Screws, and then tighten them.
Then, firmly tighten the four 5/16" x 3/4"
Screws (4).
13
93
H
4
1
1
86
4
11
4
14.
Carefully slide the Upright Crossbar (31)
between the Left and Right Uprights (89, 90).
Attach the Upright Crossbar with the four 5/16"
x 3/4" Screws (4) that you removed in step 6
and four 5/16" Star Washers (11);
start all four
Screws, and then tighten them.
14
11
4
11
90
89
31
4
G
G
Ground Wire