ProForm Performance 1500 Instruction Manual - Page 15

Have a second person hold the Frame until, step 20 is completed.

Page 15 highlights

17. Firmly tighten the six 3/8" x 4" Screws (7) (only one side is shown). Then, press the Left Base Cover (82) and the Right Base Cover (83) onto the Base (94). 17 82 83 18. Note: If the treadmill is assembled on a smooth surface, it may roll forward during this step. Raise the Frame (56) to the upright position. Have a second person hold the Frame until step 20 is completed. Remove the two 5/16" x 3/4" Screws (4) from the Latch Crossbar (38). Orient the Latch Crossbar (38) as shown. Make sure that the "This side toward belt" sticker (I) is facing the treadmill. Attach the Latch Crossbar to the brackets on the Frame (56) with the two 5/16" x 3/4" Screws (4) that you just removed and two 5/16" Star Washers (11). 18 11 4 56 7 94 Brackets 38 I 11 4 15

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40

15
17.
Firmly tighten the six 3/8" x 4" Screws (7)
(only one side is shown).
Then, press the Left Base Cover (82) and the
Right Base Cover (83) onto the Base (94).
17
83
82
94
7
18.
Note: If the treadmill is assembled on a
smooth surface,
it may roll forward during
this step.
Raise the Frame (56) to the upright position.
Have a second person hold the Frame until
step 20 is completed.
Remove the two 5/16" x 3/4" Screws (4) from the
Latch Crossbar (38).
Orient the Latch Crossbar (38) as shown.
Make
sure that the “This side toward belt” sticker
(I) is facing the treadmill.
Attach the Latch
Crossbar to the brackets on the Frame (56) with
the two 5/16" x 3/4" Screws (4) that you just
removed and two 5/16" Star Washers (11).
56
38
I
11
11
4
4
Brackets
18