ProForm Power 795 Treadmill User Manual - Page 11
If You Do Not Connect The Con
View all ProForm Power 795 Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
10. With the help of a second person, hold the console assembly near the Left Handrail (88). 10 Connect the Upright Wire (81) to the console wire. See the inset drawing. The connectors should slide together easily and snap into place. If they do not, turn one connector and try again. IF YOU DO NOT CONNECT THE CONNECTORS PROPERLY, THE CONSOLE MAY BECOME DAMAGED WHEN YOU TURN ON THE POWER. Remove the wire tie from the Upright Wire. Console Wire 81 Console Assembly Console Wire 81 Wire Tie 88 11. S et the console assembly on the Left Handrail (88) and the Right Handrail (87). Be careful not 11 to pinch any wires. Insert the excess Upright Wire (not shown) into the Left Handrail. Attach the console assembly with six #8 x 1/2" Screws (1), four 5/16" x 1 1/4" Screws (4), four 5/16" Flat Washers (113), and four 5/16" Star Washers (11). Start all six Screws and all four 11 Screws, and then tighten them. 113 See step 7. Fully tighten the four 5/16" x 1" Screws (5) and the two 5/16" x 1 1/4" Bolts (4). 4 87 1 1 Console Assembly 88 11 113 4 1 1 11