ProForm Quick Start 7.0 Uk Manual - Page 15

THE INFORMATION MODE The console features an information mode that keeps track of treadmill usage information and allows you to select a unit of measurement for the console. You can also turn on or turn off the display demo mode. To select the information mode, insert the key into the console while holding down the Stop button. Then, release the Stop button. When the information mode is selected, the following information will be shown: An "M" for metric kilometers or an "E" for English miles will appear in the left display. Press the Speed increase button to change the unit of measurement, if desired. The console features a display demo mode, designed to be used if the treadmill is displayed in a store. While the demo mode is turned on, the console will function normally when you plug in the power cord, switch the reset/off circuit breaker to the reset position, and insert the key into the console. However, when you remove the key, the displays will remain lit, although the buttons will not function. If the demo mode is turned on, a "d" will appear in the left display while the information mode is selected. To turn on or turn off the display demo mode, press the Speed decrease button. The right display will show the total number of hours that the treadmill has been used. Press the Disp button below the right display. The right display will also show the total number of kilometers or miles that the walking belt has moved. To exit the information mode, remove the key from the console. 15