ProForm Quick Start 7.0 Uk Manual - Page 8
Aged When You Turn On The Power.
View all ProForm Quick Start 7.0 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
3. Make sure the handrail assembly is resting on the Uprights (86). If necessary, press down gen- 3 tly on the handrail assembly in the locations shown. 4 Attach the handrail assembly to the Uprights (86) with two 3/8" x 1 1/4" Patch Bolts (2) and two 3/8" Star Washers (4). Start both Patch 2 Bolts before tightening either of them. 86 Handrail Assembly 4 2 4. Have a second person hold the Console (103) near the handrail assembly. Connect the Upright 4 Wire (87) to the handrail assembly wire (A). See the inset drawing. The connectors should slide together easily and snap into place. If they do not, turn one connector and try again. IF A THE CONNECTORS ARE NOT CONNECTED PROPERLY, THE CONSOLE MAY BE DAM- AGED WHEN YOU TURN ON THE POWER. Make sure that the Upright Wire and the handrail assembly wire have connectors that are the same size. 87 Connect the other handrail assembly wire (B) to the console wire (C). Insert the connectors and the excess wire into the handrail assembly. A 87 103 C B Handrail Assembly 8