ProForm Sr20 Bike Canadian English Manual - Page 5

2. While another person lifts the back of the Frame (1) slightly, attach the Rear Stabilizer (30) to the Frame with two M10 x 75mm Carriage Bolts (33) and two M10 Black Nylon Locknuts (34). 2 34 1 3. Attach the Handlebar (15) to the Upright (13) with two 3 M10 x 42mm Button Bolts (6), two M10 Split Washers (46), and two M10 Black Nylon Locknuts (34). 34 34 30 33 15 46 46 6 13 4. The Console (16) requires three "AA" batteries (not included); alkaline batteries are recommended. Insert 4 three batteries into the Console as shown. Make sure that the batteries are oriented as shown by the dia- gram inside the Console. 16 Batteries 5. Hold the Console (16) near the Upright (13). Insert the console cable and the console wire into the indicated hole and down through the Upright. Attach the ground wire to the Upright with an M4 x 16mm Screw (32). Insert the excess wire and cable into the Upright (13). Attach the Console (16) to the Upright with four M4 x 16mm Screws (32). Make sure that the wires and the cable are not pinched. 5 5 16 Ground Wire 32 32 Hole Console Console Wire Cable 32 13