ProForm Xp 615 Trainer Treadmill English Manual - Page 10

11. Raise the Frame (53) to the position shown. Have a second person hold the Frame until 11 this step is completed. Orient the Latch Assembly (55) so that the large barrel and the Latch Knob (54) are in the positions shown. Attach the lower end of the Latch Assembly to the bracket on the Base (80) with a 3/8" x 2" Bolt (4) and a 3/8" Nut (8). Attach the upper end of the Latch Assembly (55) to the bracket on the Frame (53) with a 3/8" x 2" Bolt (4) and a 3/8" Nut (8). Note: It may be necessary to move the Frame back and forth to align the Latch Assembly with the bracket. Lower the Frame (53) (see HOW TO LOWER THE TREADMILL FOR USE on page 18). 53 8 4 55 54 Large Barrel 80 8 4 12. Make sure that all parts are properly tightened before you use the treadmill. If there are sheets of clear plastic on the treadmill decals, remove the plastic. To protect the floor or carpet, place a mat under the treadmill. Keep the included hex key in a secure place; the hex key is used to adjust the walking belt (see pages 20 and 21). 10