ProForm Xp 90 Bike Exerciser English Manual - Page 5
M8 x 19mm Button Screws 40 and two M8 Split
View all ProForm Xp 90 Bike Exerciser manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
2. Orient the Front Stabilizer (15) as shown. While another person lifts the front of the Frame (1), attach the Front 2 Stabilizer to the Frame with two M10 x 112mm 76 Carriage Bolts (76) and two M10 Nylon Locknuts (72). 3. Attach the Frame Rail (52) to the Frame (1) with two M8 x 19mm Button Screws (40) and two M8 Split 3 Washers (55). Be careful to avoid damaging the Side Shields (26, 27). 15 1 72 27 40 52 55 26 1 4. While another person holds the Upright (2) in the position shown, connect the Upper Wire Harness (42) to the Lower Wire Harness (43). Gently pull the upper end of the Upper Wire Harness to remove any slack from the Wire Harnesses. Slide the Upright (2) onto the Frame (1) as shown. Attach the Upright with three M8 x 19mm Button Screws (40) and three M8 Split Washers (55). Be careful to avoid pinching the Wire Harnesses (42, 43). 4 Avoid pinching the wire harnesses during this step. 2 42 40 43 55 40 55 55 40 1 5