ProForm Xp440 R Bike English Manual - Page 7

3. Orient the Upright (2) as shown. Have a second person hold the Upright near the Frame (1). 3 Locate the wire tie inside the Upright (2). Tie the lower end of the wire tie to the ends of the Main Wire (53) and the Frame Pulse Wire (42). Then, pull the other end of the wire tie upward until the Main Wire (53) and the Frame Pulse Wire (42) are routed through the Upright (2). Wire Tie 2 Wire Tie 1 42 53 4. Tip: Avoid pinching the wires. Set the Upright (2) on the Frame (1). Attach the Upright (2) to the Frame (1) with four M8 x 15mm Screws (76). 4 76 2 Avoid pinching the wires 1 5. Orient the Shield Cover (12) as shown. Then, insert the Main Wire (53) and the Frame Pulse Wire (42) upward through the Shield Cover. Slide the Shield Cover (12) onto the Upright (2). Then, press the Shield Cover into the Right and Left Frame Shields (38, 39). 5 53 42 12 2 39 38 7