ProForm Zr3 Bike English Manual - Page 7

3. While another person holds the Upright (2) near the Frame (1), locate the wire tie inside the Upright. See the inset drawing. Tie the lower end of the wire tie to the ends of the Game/Pulse and Main Wire Harnesses (42, 43). Then, pull the other end of the wire tie upward until the Wire Harnesses are routed completely through the Upright (2). Tip: Do not pinch the Wire Harnesses (42, 43). Attach the Upright (2) to the Frame (1) with an M10 x 63mm Bolt Set (62). 3 43 42 2 62 Wire Tie 42, 43 1 62 Avoid pinching the Wire Harnesses (42, 43) 4. Identify the Right and Left Handlebars (59, 60), which are marked with "Right" and "Left" stickers. 4 Tip: Do not damage the Wire Harnesses (42, 43). Attach the Handlebars (59, 60) to the Upright (2) with two M8 x 53mm Button Bolts (72) and two M8 Jam Locknuts (89). 60 89 43 42 Avoid damaging the Wire Harnesses (42, 43) 2 59 72 7