ProForm Zr3 Bike English Manual - Page 8
Tip: Do not pinch the Wire Harnesses 42
View all ProForm Zr3 Bike manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
5. The Console (4) can use four D batteries (not included); alkaline batteries are recommended. 5 IMPORTANT: If the Console has been exposed to cold temperatures, allow it to warm to room temperature before inserting batteries. Otherwise, you may damage the console displays or other electronic compo- nents. Remove the indicated screw, remove the battery cover, insert the batteries into the bat- tery compartment, and then reattach the battery cover. Make sure to orient the batteries as shown by the diagrams inside the battery compartment. To purchase an optional AC adapter, contact the store where you purchased this product or call the telephone number on the front cover of this manual. To avoid damaging the console, use only a manufacturer-supplied AC adapter. Plug one end of the AC adapter into the jack on the console; plug the other end into an outlet installed in accordance with all local codes and ordinances. Screw Battery Cover Batteries 4 Batteries 6. While another person holds the Console (4) near the Upright (2), connect the console wire harnesses to the Wire Harnesses (42, 43); make sure to connect the console wire that has a tag to the game wire that has a tag. Insert the excess wire downward into the Upright. Tip: Do not pinch the Wire Harnesses (42, 43). Attach the Console (4) to the Upright (2) with four M4 x 16mm Flange Screws (80). 6 4 Avoid pinching the Wire Harnesses (42, 43) 43 2 42 Console Wire Harnesses 80 80 8