ProForm Zt4 Treadmill English Manual - Page 12
If You Do Not Connect The Con
View all ProForm Zt4 Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
9. Attach the Console Crossbar (61) to the Left and Right Uprights (66, 76) with four #10 x 3/4" Screws (8) and four #10 Star Washers (23). Start all four Screws, and then tighten them. Firmly tighten the two 5/16" x 3/4" Screws (5) and the two 5/16" x 3" Screws (7). 9 8 23 7 5 66 61 8 23 7 76 5 10. With the help of a second person, hold the console assembly near the Right Handrail (64). Connect the Upright Wire (63) to the console wire. See the inset drawing. The connectors should slide together easily and snap into place. If they do not, turn one connector and try again. IF YOU DO NOT CONNECT THE CONNECTORS PROPERLY, THE CONSOLE MAY BECOME DAMAGED WHEN YOU TURN ON THE POWER. Then, remove the wire tie from the Upright Wire. Connect the console wire to the ground wire on the Console Crossbar (61). 10 Console Assembly Console Wire 63 64 Ground Wires Wire 61 Console Tie Wire 63 12