ProForm Zt6 Treadmill English Manual - Page 22
How To Use The Stereo Sound System
View all ProForm Zt6 Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
HOW TO USE THE STEREO SOUND SYSTEM To play music or audio books through the console's stereo speakers, you must connect your MP3 player, CD player, or other personal audio player to the console through the MP3 jack. Plug one end of your audio wire into the audio jack on the console. Plug the other end into a jack on your MP3 player, CD player, or other personal audio player. Make sure that the audio wire is fully inserted. Next, press the play button on your MP3 player, CD player, or other personal audio player. Adjust the volume on your personal audio player or press the volume increase and decrease buttons on the console. UNITS-To change the unit of measurement, press the Enter button. To view distance in miles, select ENGLISH. To view distance in kilometers, select METRIC. DEMO-The console features a display demo mode, designed to be used if the treadmill is displayed in a store. While the demo mode is turned on, the console will function normally when you plug in the power cord, press the power switch into the reset position, and insert the key into the console. However, when you remove the key, the displays will remain lit, although the buttons will not function. If the demo mode is turned on, the word ON will appear in the matrix. To turn on or turn off the demo mode, press the Enter button. If you are using a personal CD player and the CD skips, set the CD player on the oor or another at surface instead of on the console. CONTRAST LVL-Press the Incline increase and decrease buttons to adjust the contrast level of the display. THE INFORMATION MODE If a module is connected, you may also select the following screen: The console features an information mode that keeps track of treadmill information and allows you to personalize console settings. 1. Select the information mode. TRAINER VOICE-To turn on or turn off the voice of the personal trainer, press the Enter button. If an iFit module is connected, you may also select the following screens: To select the information mode, hold down the Stop button while inserting the key into the console and then release the Stop button. When the information mode is selected, the following information will be shown: DEFAULT MENU-The default menu will appear when you insert the key into the console or when you press the Home button. Press the Enter button repeatedly to select the manual main screen or the iFit screen as the default menu. The time display will show the total number of hours that the treadmill has been used. The distance display will show the total number of miles (or kilometers) that the walking belt has moved. The lower section of the display will show the status of an iFit module. If an iFit module is connected, the display will show the words WIFI MODULE. If a USB module is connected, the display will show the words USB/SD MODULE. If no module is connected, the display will show the words NO IFIT MODULE. CHECK WIFI STATUS-Press the Enter button to check the status of your iFit module. The lower display will show the software version number, the network SSID, the network encryption type, the connection status, the wireless signal strength, the IP address of the module, the number of registered users and their names, the results of the DNS lookup, and the status of the iFit server. SEND/RECEIVE DATA-To send and receive workouts, workout logs, and updates, press the Enter button. When the process is nished, the words TRANSFERS DONE will appear in the display. 2. Select the optional screens. 3. Exit the information mode. While the information mode is selected, the matrix will display several optional screens. Press the decrease button next to the Enter button to select each of the following screens: To exit the information mode, remove the key from the console. 22