Pyle PA105 Instruction Manual - Page 4

Installation Guidelines

Get Pyle PA105 PDF manuals and user guides View all Pyle PA105 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 4 highlights

REAR PANEL - PA105/PA205 9.Voltage Switch The amplifier has selectable input voltage from 110V/60Hz which is the standard in USA and CANADA. You can also switch the input voltage to 220V/50Hz for EUROPEAN operation. Please make sure the switch is in the proper position before operating, otherwise severe damage will result not cover by the warranty. Please also replace the fuse with proper rating in this situation (see the SPECIFICATIONS for the fuse rating). 10.Unswitched AC Accessory Outlet - 300W MAX. 11.DC 4A/12V Input Jack (PA105) Allows you to power the amplifier from 12-volt battery source. 12.AUX / CD Input Jack Allows you to connect any high level sound source, such as a CD player, tape deck, or tuner, to the CD/AUX jack. 13.PHONO Input Jack You can connect a low level audio input source, such as a magnetic cartridge turntable to the L PHONO and R PHONO jacks. 14.PHONO and AUX/CD Input Selector Lets you select the input source you want to connect to the amplifier. 15.MIX BUS Jack Allows you to connect another PA105/PA205 to this jack to double the size of your PA system. 16.Push-Terminal Connectors Let you easily connect speaker wires directly to the amplifiers. INSTALLATION GUIDELINES Connecting the GND (GROUND) screw terminal If you connect a low level audio input source (turntable) to the PHONO, please connect your turntable's ground wire (usually black or green) to the amplifier's GND terminal, to avoid a low frequency hum. You can also use this screw to ground any other system connection. Input connections The PA105/PA205 accept a board range of input sources, including: Microphones (up to two simultaneously) Compact Disc (CD) player Cassette, Reel-to-Reel or other tape player Radio Tuner Magnetic Cartridge Turntable 3

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
REAR PANEL - PA105/PA205
9.Voltage Switch
The amplifier has selectable input voltage from 110V/60Hz which is the standard in USA and
CANADA. You can also switch the input voltage to 220V/50Hz for EUROPEAN operation. Please
make sure the switch is in the proper position before operating, otherwise severe damage will
result not cover by the warranty. Please also replace the fuse with proper rating in this situation
(see the SPECIFICATIONS for the fuse rating).
10.Unswitched AC Accessory Outlet - 300W MAX.
11.DC 4A/12V Input Jack (PA105)
Allows you to power the amplifier from 12-volt battery source.
12.AUX / CD Input Jack
Allows you to connect any high level sound source, such as a CD player, tape deck, or tuner,
to the CD/AUX jack.
13.PHONO Input Jack
You can connect a low level audio input source, such as a magnetic cartridge turntable to the
L PHONO and R PHONO jacks.
14.PHONO and AUX/CD Input Selector
Lets you select the input source you want to connect to the amplifier.
15.MIX BUS Jack
Allows you to connect another PA105/PA205 to this jack to double the size of your PA system.
16.Push-Terminal Connectors
Let you easily connect speaker wires directly to the amplifiers.
Connecting the GND (GROUND) screw terminal
f you connect a low level audio input source (turntable) to the PHONO, please connect
your turntable's ground wire (usually black or green) to the amplifier's GND terminal, to
avoid a low frequency hum.
You can also use this screw to ground any other system connection.
Input connections
The PA105/PA205 accept a board range of input sources, including:
Microphones (up to two simultaneously)
Compact Disc (CD) player
Cassette, Reel-to-Reel or other tape player
Radio Tuner
Magnetic Cartridge Turntable
3
INSTALLATION GUIDELINES