Pyle PLTS76DU User Manual - Page 14

Remote Control Ref # Button Function This button is used to confirm selections and settings within many 23 ENTER of the menus in the OSD system. 24 In DISC mode, press it to reverse rapidly Use to input numerical values during programming, with the GOTO 25 0-9 button, or to directly select a track to play . In Radio mode, (when the RDS engaged,), 0 serves as TA function, 9 serves as the AF function . 26 +10 This button is used with the other number buttons for use with two-digit number entries. 27 1-6 Six numbered preset buttons store and recall stations for each band Preparing the Remote Control Inserting the Battery 1.First push to inside as the direction indicated by the arrow (See 1 )And then Remove the battery holder as the direction indicated by the arrow (See 2 ). 2.Replace the battery Set a new battery property with (+)side up as illustrated (See 3 ). 3.Insert the battery holder. Push in the holder to the original position(See 4 ). Using the Remote Control Face the remote control towards the player front face IR mark (remote control signal receiver). Operation angle: About 30 degree in each the direction of the front of the IR mark. Note : The lithium cell in the battery compartment of remote control has been secured for transport with a foil . Before initial use please remove this foil so that the remote control is ready for operation . -12-